How do i change a belt on a 1995 pontiac grand am gt 3.1l v6?

do i nee to remove the motor mountHow do i change a belt on a 1995 pontiac grand am gt 3.1l v6?
yes you do but I wouldnt recommend doing it yourself it is a pain in the neck. I would pay the money to have it done. I did one on a 96 and it was horrible about 3 hours and many swear words later i did get it but would never do it again.How do i change a belt on a 1995 pontiac grand am gt 3.1l v6?
turn off the engine, maybe wait till it cools. the belt goes to power steering, alternator, you need to loosen those nuts so you can get the old belt offHow do i change a belt on a 1995 pontiac grand am gt 3.1l v6?
If your 1995 Grand Am has a serpentine belt then you do not have to take off any mounts. All you need is a long 3/8 inch breaker bar to release the tension of the tensioner pulley and the belt will slip off. Just make sure that your route the new belt exactly as the old belt. Once you have made sure the belt is routed and seated properly, you can release the tensioner and it will tighten the belt. Run the engine to make sure all your accesories work and that the belt is tracking properly